Table of Contents
Understanding Peak Flow Meter Readings
A peak flow meter is a simple device used to measure how well your lungs are working by measuring the maximum speed at which you can blow air out of your lungs. It is commonly used by individuals with asthma to monitor their lung function and track changes in their breathing. Understanding how to use a peak flow meter correctly is essential for accurate readings and effective management of asthma symptoms.
To use a peak flow meter, start by standing up straight and taking a deep breath. Make sure your lips create a tight seal around the mouthpiece of the peak flow meter. Then, blow out as hard and fast as you can into the device. Repeat this process three times, recording the highest reading of the three as your peak flow measurement.
Peak flow meter readings are typically measured in liters per minute (L/min) and can vary depending on factors such as age, height, and gender. It is important to establish your personal best peak flow measurement when your asthma is well-controlled to use as a baseline for comparison during times of worsening symptoms.
Peak flow meter readings can be categorized into three zones: green, yellow, and red. The green zone represents your personal best peak flow measurement and indicates that your asthma is well-controlled. The yellow zone signifies a decrease in peak flow measurement, indicating worsening asthma symptoms. The red zone indicates a severe decrease in peak flow measurement, signaling a medical emergency that requires immediate attention.
| ROC-2315 RO controller instruction (220V) | |||
| Model | ROC-2315 | ||
| Single detection | Dry Contact input | Raw water no water protection | |
| (six channels) | Low-pressure protection | ||
| \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | High-pressure protection | ||
| \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | Pure water tank high\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ level | ||
| \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | External control mode signal | ||
| \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | Running reset | ||
| Control port | Dry Contact output | Raw water pump | SPST-NO low capacity : AC220V/3A Max ;AC110V/5A Max |
| (five channels) | Inlet valve | \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | |
| \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | High pressure pump | \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | |
| \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | Flush valve | \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | |
| \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | Conductivity over-limit drainge valve | \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ | |
| Measurement detection point | Product water conductivity and with Automatic Temperature compensation (0\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～50\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\）\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\℃ | ||
| Measurement range | Conductivity : 0.1~200\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\μS/cm/1~2000\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\μS/cm/10~999\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\μS/cm (with different conductivity sensor ) | ||
| Product water temp. : 0~50\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\℃ | |||
| Accuracy | 1.5 level | ||
| Power supply | AC220V (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\±10%)\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ ,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ 50/60Hz | ||
| Working Environment | Temperature:\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\（0\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\～50\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\）\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\℃\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ ; | ||
| Relative Humidity :\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\≤85%RH\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ (no condensation ) | |||
| Dimension | 96\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×96\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×130mm( height \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×width\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×depth) | ||
| Hole size | 91\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×91mm\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\（height \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\×width\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\） | ||
| Installation | Panel mounted ,fast installtion | ||
| Certification | CE | ||
Monitoring your peak flow meter readings regularly can help you and your healthcare provider track changes in your lung function and adjust your asthma management plan accordingly. It is important to follow your healthcare provider’s recommendations for using a peak flow meter and interpreting the results to effectively manage your asthma symptoms.
In addition to using a peak flow meter, it is essential to take your prescribed asthma medications as directed and avoid triggers that can worsen your symptoms. Keeping a diary of your peak flow meter readings, symptoms, and triggers can help you identify patterns and make informed decisions about your asthma management.
If you experience a significant decrease in your peak flow meter readings or have trouble breathing, seek medical attention immediately. Asthma attacks can be life-threatening, and prompt treatment is crucial for managing symptoms and preventing complications.
In conclusion, understanding how to use a peak flow meter correctly and interpret the results is essential for effective asthma management. Regular monitoring of your peak flow meter readings, along with following your healthcare provider’s recommendations, can help you track changes in your lung function and adjust your asthma management plan as needed. By taking proactive steps to manage your asthma, you can improve your quality of life and reduce the risk of asthma attacks.
